On a busy production line, thousands of products can be packaged and labelled every hour, making it almost impossible to check every pack manually.
Even small errors, such as an incorrect label, an unreadable barcode or a missing date code, can lead to rejected deliveries, wasted stock and time-consuming rework. Finding them during production is much easier than dealing with them once products have been shipped.
Vision inspection systems use cameras and specialist software to inspect products automatically as they move along the production line, checking labels, packaging and printed information for errors.
So, what can they actually check, and what difference can it make to your production line?
1. Labels: Is the right label in the right place?
Every label that passes through your line needs to be applied accurately and consistently, especially if you’re handling different products, flavours or packaging formats.
When you’re switching between products throughout the day, it’s easy for labels to get mixed up. And if the wrong label ends up on a product, you could find yourself having to stop production, identify the affected stock and relabel hundreds of packs. If the error isn’t found until after dispatch, the problem becomes much harder to put right.
A vision inspection system can check:
- Label presence: Is there a label on the product?
- Position: Is the label straight and in the correct place?
- Quality: Are there any wrinkles, tears or other visible defects?
- Accuracy: Is it the correct label for the product being packaged?
Label accuracy is particularly important for food manufacturers. If a product carries the wrong ingredients or allergen information, it could pose a safety risk and potentially lead to a product recall.
Take a production line switching between two similar products with different ingredients. If the previous product’s labels are accidentally left in the labelling machine, a vision system configured to recognise the correct label can pick up the mismatch as products pass through the inspection point.
Rather than finding the mistake at the end of the shift, operators can identify the affected products, correct the labelling equipment and prevent more incorrect packs being produced.
2. Barcodes: Will they scan when they need to?
Every barcode on your products has a job to do, whether that’s identifying stock in a warehouse, tracking goods through distribution or allowing products to be scanned at a retail checkout.
If a barcode is damaged, poorly printed or contains the wrong information, those processes become more difficult. Warehouse staff might have to identify products manually, deliveries could be delayed and customers may reject stock that doesn’t meet their requirements.
A vision inspection system can check:
- Presence: Is the barcode printed on the product or label?
- Readability: Can the barcode be successfully decoded?
- Print quality: Is the barcode clear, without missing or blurred sections?
- Accuracy: Does it contain the correct information for the product?
Depending on the equipment, systems can inspect traditional linear barcodes, QR codes and Data Matrix codes.
For example, if a printhead becomes dirty or starts producing faded barcodes, an inspection system can flag the problem while products are still on the line. Operators can then clean or adjust the printer and check which products need attention, rather than finding out there’s an issue when a delivery reaches a customer’s warehouse.
What’s the difference between barcode reading and verification?
- Barcode reading checks whether a barcode can be scanned and its information decoded. The system can also compare that information with what’s expected for the product, helping catch incorrect codes.
- Barcode verification measures the quality of the printed code against recognised standards, such as ISO/IEC 15416 for linear barcodes and ISO/IEC 15415 for two-dimensional codes.
It looks at details such as contrast, print consistency and defects, then gives the barcode a quality grade.
A barcode might scan perfectly well on your own production line but still have printing defects that make it less reliable on other scanning equipment. Formal verification gives you a standardised way to assess print quality and check whether your barcodes meet customer or industry requirements.
For your production team, reading can catch incorrect or unreadable codes before dispatch, while verification can help identify print quality problems and support compliance with barcode specifications.
Both can help avoid the extra handling, delays and rejected stock that come with barcodes that don’t work as expected.
3. Date and batch codes: Is the right information printed clearly?
If you’re printing best-before dates, use-by dates, batch numbers or lot codes, you’ll know how often that information needs to change between production runs.
A wrong digit, missing character or incorrect date can mean stock has to be held back while someone checks what’s been printed. And if you need to trace a particular batch following a quality issue, inaccurate codes can make finding the right products much more difficult.
A vision inspection system can check:
- Presence: Has the date or batch code been printed?
- Readability: Are all the characters clear and complete?
- Accuracy: Does the printed information match what’s expected for that production run?
- Print quality: Are there missing characters, smudges or faded sections?
Say your coding printer begins running low on ink or develops a fault partway through a shift. The first few codes might be readable, but as printing gets worse, characters can become faint or incomplete.
Without automated checking, the problem might not be flagged until the next manual check, leaving your team to work out when the fault started and how many products could be affected.
Inspection vision systems capture each code as it passes the camera and checks it against the expected information or any print quality requirements. Some systems use optical character recognition (OCR) to read the characters, while others compare the printed image with an approved reference.
Either way, if a code fails inspection, the system can alert operators and, where the line has the necessary equipment, automatically reject the affected product or stop production.
Your team can then correct the printer fault and deal with the affected products before more stock needs to be checked or reworked.
4. Packaging: Are the correct components present and properly fitted?
It’s not just labels and printed information that can go wrong. The packaging itself needs checking too, particularly if your line handles several products or packaging formats.
Using the wrong container, a missing lid or a poorly positioned component can mean products need to be removed from the line, repacked or rejected altogether.
Depending on the system and packaging format, vision inspection can check:
- Packaging accuracy: Is the correct container, carton or packaging format being used?
- Component presence: Are the required lids, caps or other visible components present?
- Positioning: Are components correctly aligned and fitted?
- Visible defects: Is there any visible damage or deformation?
An inspection system configured to recognise the correct packaging can identify these differences as products move along the line, giving operators the chance to correct the problem before more packs are affected.
Depending on the equipment, the system might compare captured images against an approved reference or use barcode information to confirm the correct packaging is being used.
Cobalt’s Sentinel PackSure and LabelSure systems can work together to check both packaging and labels. PackSure checks that the packaging matches the product being manufactured, while LabelSure checks label quality, accuracy and correct application. When they’re used together, they cover pack and label in a single pass, so any potential errors are flagged straight away.
Can every vision inspection system perform all these checks?
Not every system covers all of these areas at once. Reading a barcode and checking the position of a lid, for example, can call for different cameras and software.
Line speed, product size, packaging shape and the space available for cameras all influence what a system can capture.
If your main concern is incorrect labels during changeovers, a system that checks labels against the expected product may be all you need. If coding faults or packaging defects are also occurring, you may need additional cameras or inspection points.
Fewer errors, less rework and smoother production
A fault spotted on the line can take seconds to put right. The same error discovered at goods-in or after dispatch can cost significant time and money.
The earlier a problem is found, the fewer downstream issues you will have to deal with. And because every pack is checked automatically, production runs more smoothly without adding to your team’s workload.
Choosing an inspection system isn’t just a case of picking a camera. Whether it’s labels, barcodes, date codes or packaging, what you need depends on where errors start on your line. With over 25 years of experience improving production lines, Cobalt’s specialists will review your entire process, from how you handle changeovers to where coding and labelling faults happen.
We’ll then advise on the systems and processes that work best for your operation, whether that’s a single inspection point or several.
Talk to the team at Cobalt to discover the inspection solution that best fits your line.