Packaging issues like incorrect labels or missing date codes may seem minor – and if they’re caught straight away, they often are.

But on the fast-moving factory floor, even a few minutes of downtime or time spent rectifying them can add up. By the time an error eventually gets spotted, you could be facing wasted materials, hours of rework or stock that can’t be shipped, simply because the label, code or packaging doesn’t match the contents. In some cases, it can raise compliance questions too.

You probably have a good idea of how often packaging errors happen on your line. But have you ever worked out how much – or what exactly – they’re costing the business?

Why small errors become costly

Say a label is applied incorrectly – not ideal, but the immediate cost of a replacement label is extremely affordable. But if that same fault occurs 500 times, you’re paying for 500 replacement labels, and every pack that carried the wrong one still has to be dealt with.

Or as another example, take a carton from a previous run that ends up in the feed when a new product is on the line: within minutes, a few hundred packs could be in the wrong box, each one needing to be opened, checked and repacked.

Someone has to identify stock that’s been affected, remove it from the line and work out what can be saved. If products can be relabelled or repacked, that means extra time and materials, but if they can’t, you may have to write them off altogether. And if the line has to stop while the problem is investigated, lost production time adds to the total.

Luckily, there are straightforward ways to catch these errors early. But first, it helps to know where the costs are coming from.

Where are packaging errors costing you money?

1. Rejected products and wasted materials

If the wrong label, packaging or date code means a product can’t be sold, it may have to be rejected. Depending on what you make, that could mean losing the packaging, the contents or the entire finished product, and even a small reject rate adds up when you’re producing thousands of packs every day.

Say you’re rejecting 50 packs a day at a production cost of £2 each. That’s £500 over a five-day week, or £24,000 across 48 working weeks. And that’s before counting the time spent locating and removing the faulty products.

2. Time spent on rework

Sometimes you can avoid throwing products away just by removing the wrong label, printing a replacement or repacking the product.

Even so, that rework takes up people’s time. Operators have to separate affected products and check everything’s correct before stock gets released. If two members of your team spend an hour relabelling, that’s two hours of labour taken away from normal production.

3. Lost production time

When a packaging problem forces you to stop the line, you’re not only dealing with the products already affected. You’re also losing time that could have gone into making more stock.

Wages, energy and overheads won’t stop because the line has, but with nothing being made to cover them during that time, output has to be made up later, either through overtime or moving other orders back.

4. Errors discovered after dispatch

Finding a problem once products have left your factory complicates the situation. For one, if a customer rejects the delivery, you’ll be left to arrange a return or replacement, and your team may need to trace the batch and inspect any stock that’s already been dispatched.

Beyond that, there may also be extra transport costs, complaints or charges for deliveries that don’t meet agreed standards, and the stakes are higher still if the error involves incorrect ingredients, allergens or safety information.

How much could packaging errors be costing your production line?

At the end of the financial year, packaging errors may only appear as a single figure in your budget or reports. Broken down, that figure would show how much comes from small, avoidable mistakes, time spent checking and re-checking, and minor inefficiencies that add up across every shift.

What could those costs mean for your business?

You may already know that a particular labelling machine causes problems during changeovers, or that your team often has to stop the line to investigate a particular coding error.

Looking at those figures over a year gives you a clearer picture of which problems to tackle first.

How automated inspection can minimise costs

Some packaging errors are hard to spot by eye, especially when products move quickly or the packaging looks similar. That’s where automated inspection can help: a camera checks packs at full line speed, as consistently at the end of a long shift as at the start.

Cobalt’s Sentinel range – including LabelSure, which checks that every label is accurate, clear and correctly applied, and PackSure, which confirms the right packaging is in use for the product being made – uses advanced vision technology to inspect each pack as it passes, so errors are caught before more products are affected.

Depending on which setup you choose, it can alert operators the instant a fault appears and work with your line’s controls to stop production or automatically reject affected packs, so issues are dealt with in real time, as and when they occur.

Packaging errors are easy to make, but they don’t have to be expensive to fix. With every pack checked as it goes by, you can catch issues ahead of time.

Find out where your line could improve

Every line runs differently, so Cobalt doesn’t offer one-size-fits-all solutions. With over 25 years of experience improving manufacturers’ production lines, our specialists take the time to review your process with you – how your line runs and where changeovers or manual checks might leave you exposed to gaps.

We then tailor automated inspection to fit the way your business works, configuring it around your products, line speeds and changeovers, so we catch errors as and when they occur.

Talk to Cobalt about a Sentinel solution built to catch label, code and packaging errors on your line.